Scope 2 carbon emissions

[edit] Scope in terms of carbon emissions

The Green House Gas Protocol Corporate Standard classifies GHG emissions into three ‘scopes’.

Scope 1 emissions are direct emissions from owned or controlled sources. Scope 2 emissions are indirect emissions from the generation of purchased energy. Scope 3 emissions are all indirect emissions (not included in scope 2) that occur in the value chain of the reporting company, including both upstream and downstream emission

[edit] What are scope 2 site emissions ?

Scope 2 emissions include indirect emissions, for example electricity used on-site, the emissions caused indirectly by the purchase of energy from a coal power station or electric vehicles that are charged with energy from a source with related emissions. So these will differ if measuring the scope 2 emissions from a construction site itself, measuring emissions from a building (once complete) or from the company involved in the project.

Scope 2 emissions differ from scope 3, in that they are owned or controlled by the project or company, whereas scope 3 emissions are a consequence of the activities but occur from sources not owned or under control by it.

[edit] What are indirect emissions ?

The GHG Protocol defines indirect emissions as “a consequence of the activities from the reporting company but occur at sources owned or controlled by another company.” unlike direct emissions, so these include Scope 2 and Scope 3 emissions. but the protocol makes a clear distinction between the two categories.

[edit] Related articles on Designing Buildings

• Carbon terminology.
• Greenhouse gases.
• ISO 14001:2004 Environmental management system -- Requirements with guidance for use.
• Life cycle assessment.
• PAS 2060.
• PAS 2080 Carbon management in Infrastructure.
• Scope 3 carbon emissions.
• Scope 1 carbon emissions.
• The Carbon Project: improving carbon emission data.

[edit] External links

https://ghgprotocol.org